archive-pl.com » PL » H » HOMAG-POLSKA.PL

Total: 425

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • HOMAG dividing plants for laminate flooring directly networked with short-cycle press and strip storage system
    cutting process was that the stack formation did not permit the decor precise alignment of individual planks An alternative method entails driving the longitudinally divided strips against separate stops positioned as required by individual cameras and then transporting the complete layer of planks through the cross cutting saw by means of vacuum gantries The drawback of this method once again is that it entails higher tolerances However given the ever more widespread use of system decor technologies synchronous pores embossing and so on the problem of increased tolerances has evolved to become a major drawback At HOMAG the trend towards ever smaller batch sizes is also seen as an issue demanding the use of flexible systems HOMAG has squared up to challenge and come up with a solution implementing not one but two systems both of them fully automatic and offering a high degree of flexibility One of the lines covers the spectrum range from narrow planks through to standard formats i e from 90 mm to 220 mm in width and 450 mm to 1 400 mm in length The other line covers the range from standard to multiple tile formats in other words 195 mm 400 mm in width and 1 200 mm to 1 400 mm in length Generally speaking however depending on the requirement profile HOMAG AG is able to offer 6 different basic rip saws and 2 basic cross cutting saws for this application The output of both the plants implemented using this concept is 10 cycles Both are directly linked to the respective upstream short cycle press and the fully automatic downstream storage system An additional feature of the system is that the panels are held together during the entire process monitored by the data processing system and then stacked in the same sequence

    Original URL path: http://www.homag-polska.pl/en-en/news/newsdatabase/homag/Pages/2009_Aufteilanlage_Laminatboden.aspx (2016-04-30)
    Open archived version from archive

  • Edge chamfer lacquering for flooring production
    a lower cost higher precision application unit compared to systems currently available in the marketplace vacuum transfer wheel spray jets etc HOMAG AG has risen to this challenge and developed a new no contact technique for processing special water based lacquers The particularly tricky aim of the development was to allow the system to be mounted in the transport chain section of a double end tenoner without soiling the transport system An essential condition given the need for extreme precision in the lateral guidance of planks particularly those with small chamfers The system is mounted on a stand with adjustment facility in the X and Y direction which moves the application head pneumatically out of the working area on a feed stop More information The application head is Homag s own development It operates with a maximum of 4 nozzles each working separately depending on the feed rate material absorption capacity colour coverage rate and printable surface When the lacquer application unit is not required the application head is swivelled automatically into a water bath guaranteeing that lacquer is not able to dry up over long periods out of use Lacquer feed takes place from the lacquer tank to the

    Original URL path: http://www.homag-polska.pl/en-en/news/newsdatabase/homag/Pages/edge_chamfer_lacquering.aspx (2016-04-30)
    Open archived version from archive

  • Profitable production of all batch sizes with the HOMAG Group
    and most importantly of all more economically The market demands top quality and just in time production coupled with wide product versatility both in series production and for one off jobs It is specifically to address these demands that the HOMAG Group has extended its product range in every performance category With an integral concept designed to allow more flexible more profitable production for every size and variety of production

    Original URL path: http://www.homag-polska.pl/en-en/news/newsdatabase/homag/Pages/2008_batch_size_1.aspx (2016-04-30)
    Open archived version from archive

  • Saw carriage alignment with surface decor
    alignment with surface decor When dividing unprocessed laminate panels HOMAG AG makes use of sophisticated image processing technology for precise alignment of the saw carriage This improves the quality reduces scrap costs and enhances productivity Download Deutsch Download English Contact

    Original URL path: http://www.homag-polska.pl/en-en/news/newsdatabase/homag/Pages/2008_CCD_Kameratechnik.aspx (2016-04-30)
    Open archived version from archive

  • HOMAG KAL 310/C edge bander maximizes operational flexibility
    C edge bander maximizes operational flexibility Demand for automatic resetting to different profiles is on the increase With the extended KAL 310 range HOMAG is able to offer an ideal solution to calls for growing production flexibility Download Deutsch Download

    Original URL path: http://www.homag-polska.pl/en-en/news/newsdatabase/homag/Pages/2008_KAL310_C.aspx (2016-04-30)
    Open archived version from archive

  • HOMAG window technology – flexibility plus performance
    to 100 window units per shift Over the past 5 to 6 years CNC processing centres have increasingly become an established feature of the window production sector The HOMAG Group alone has successfully commissioned over 200 of its processing centres in window production workshops The reasons for their increased popularity are their outstanding flexibility window front door and furniture production on one and the same machine reliable machine capacity utilization

    Original URL path: http://www.homag-polska.pl/en-en/news/newsdatabase/homag/Pages/2008_window_technology.aspx (2016-04-30)
    Open archived version from archive

  • Economical furniture production using lightweight technology
    of developments in the field of lightweight technology over the past ten years and offers a range of seamless solutions to cover every stage in the processing of lightweight panels Alongside the manufacture and dividing of panels factors of particular importance to successful and economical furniture production in the lightweight sector are edging and fastening technology Neben der Plattenherstellung und aufteilung sind insbesondere die Bekantung sowie die Befestigungstechnik die entscheidenden

    Original URL path: http://www.homag-polska.pl/en-en/news/newsdatabase/homag/Pages/2008_lightweight_technology.aspx (2016-04-30)
    Open archived version from archive

  • Homag Group sets standards in laminate flooring speed and precision
    precision panels with a tolerance of just 0 1mm at a constant rate of material throughfeed Infeed takes place using vacuum supported conveyors and servo synchronous running alignment stations The hogging and sawing units are designed to permit free positioning within fractions of a second allowing sawing unit readjustment in the gap between two panels without loss of time Throughout the entire operation strips are sawn off the panel in

    Original URL path: http://www.homag-polska.pl/en-en/news/newsdatabase/homag/Pages/2008_laminate_flooring.aspx (2016-04-30)
    Open archived version from archive



  •